Products

MagO Cladding is a durable, clip applied, non-combustible cladding system suitable for commercial, institutional, and residential construction projects. It provides an integral 15mm (5/8 inch) pressure equalized drainage cavity.

Benefits of MagO Cladding Systems

Reduced installation time and cost.
There is no requirement for LGS C and Z sections required for low density mineral insulation batts. This in itself is a major cost savings in materials and time.
MagO Cladding Systems 1, 3 and 4 are non-combustible. Most rigid insulation is combustible.
No complicated corner pieces to deal with.
4-sided shiplap edges reduce caulking.

No health and safety issues, zero carcinogens to worry about.
Low cost, no furring strips, faster installation and affordable materials.
Vertical panels and Horizontal panels can be inter-mixed in various patterns.
Panels can easily be routed for address or decorative designs.
Window trim and other gingerbread can be machined from panel stock and attached to the cladding.

Panels

Nominal 4 x 2 ft panel for horizontal orientation

Nominal 2 x 4 ft panel for vertical orientation

Nominal 4 x 4 ft panel, works with V and H panels

Spacer block, standard size 100 x 50 mm (4 x 2 inch)

Standard clip, 100 mm (4 inch) long. Base rail is the same profile and is supplied in 6-meter (20 ft) lengths, pre-drilled for drainage and pressure equalization.

MagO Cladding System 1.

Basic system without insulation.

Isometric Detail System 1

Spot Detail System 1

System 1 Corners

MagO Cladding System 2.

“Get your thermal break on”

MagO Cladding can be directly applied over several types of rigid insulation, poly-isocyanurate, EPS, HD mineral-wool, XPS. This ability reduces time, expense, and thermal bridging. CBT promotes Atlas Energy Shield Continuous Wall Insulation.

Isometric Detail System 2

Spot Detail System 2

System 2 Corners

MagO Cladding System 3.

High-performance space-age Aerogel insulation. R-10 per inch, Hydrophobic yet permeable.

MagO Cladding panels can be applied directly over Aerogel batts, reducing time, expense, and thermal bridging. Due to its hydrophobic nature WRB is optional.

Isometric Detail System 3

Spot Detail System 3

MagO Cladding System 4.

Highest performing insulation applied under MagO Cladding panels. R 63 per inch.

Using VIPs outboard of the structural sheathing can eliminate the need for wall-cavity insulation and vapor barriers. They also handily move the condensation point outside of the structure and into the drainage cavity.

Placing VIPs under our cladding panels provides excellent protection against punctures and also makes it quite easy to replace them should it become necessary. Any failed VIPs would show when using infra-red scanning of building elevations.

The VIP envelope is made from layers of aluminum and polyethylene, which can be taped to form a WRB. Adding a separate WRB, as a “belt and suspenders” approach can enhance life span in high humidity locations.